1.  Product characteristics.
It adopts imported 828 resin or 128 resin, high quality color filler, solvent, BYK (Bick) additives, American gas company curing agent and other raw materials. It is a two-component material with high solid content and low viscosity. It has a series of excellent features, such as high mechanical wear resistance and adhesion, excellent chemical resistance, resistance to acid, alkali, salt liquid and petroleum products, and excellent flooring surface coating beauty and decorative properties.
2. Usage description.
(1) Uses.
General industrial plants (such as electronic plants, food plants, precision machinery plants), GMP industry plants, laboratories, shopping centers, parking lots and other ground surface coatings.
(2) Construction requirements.
Mixing: During storage, component A may have slight precipitation, mix component A well before mixing; pour A/B into mixing barrel proportionally and mix well before construction.
Construction method: Base coat: use base coat to achieve uniform film formation.
Middle coat: use middle coat and mix quartz sand to the required thickness.
Top coating: scrape plane coating, mixer material on the closed medium coating, with a special knife with teeth scraping (Note: must be back to the knife).
Reference dosage: 0.7-3.0kg/m 2( two times)
Construction conditions: water content requires less than 8%, relative humidity less than 55%, rainy days or when the relative humidity of the atmosphere is higher than 85%, or the temperature is below 10 ℃, should avoid construction.
3. Caution.
Sealed storage: in a cool and ventilated place, moisture-proof and sun-proof.
Notes.
This product is a chemical, swallowing is harmful or fatal, if swallowed should immediately seek medical advice. If splashed in the eyes accidentally, flush with plenty of water and seek medical attention immediately in serious cases. Pay attention to take precautionary measures, fire and explosion prevention, and the disposal of residues should comply with the safety regulations of relevant countries or local governments.

Technical specifications:

Color: customizable

Drying time (determined by actual temperature): Surface drying: 10h; Actual drying: 36h

Specification: Component A: 25KG; Component B: 5KG