Product features:

Imported 828 resin or 128 resin, high quality fillers, solvents, BYK(BYK) additives, American gas company curing agent and other raw materials. Through advanced technology refined, is a high solid content, low viscosity of the two-component material, QLU-3088 has a series of excellent characteristics: such as high mechanical wear resistance and adhesion, excellent chemical resistance, acid, alkali, salt solution and petroleum products, with excellent floor coating beautiful decorative.

2. Instructions for use:

(1) Use:

General industrial plant (such as electronics factory, food factory, precision machinery factory), GMP industry plant, laboratory, shopping center, parking lot and other ground surface coating.

(2) Construction requirements:

Mixing: During storage, component A may be slightly precipitated, and component A should be thoroughly stirred before mixing; Pour A/B into the mixing bucket proportionally and stir evenly before construction.

Reference dosage: 0.1-0.8kg/m 2(twice)

Construction conditions: Moisture content requirements below 8%, relative humidity below 55%, rainy days or atmospheric relative humidity above 85%, or temperature below 10℃, should avoid construction.

3. Precautions:

Sealed storage: in a cool and ventilated place, moisture-proof, sun protection.

Note:

This product is a chemical and can be harmful or fatal if swallowed. If swallowed, seek medical attention immediately. If accidentally splashed into eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Pay attention to take preventive measures, fire and explosion prevention, residue disposal should comply with the relevant national or local government safety regulations. ,

Technical parameter